Porting the STM32CubeWL firmware library to the Generic Node Sensor Edition hardware
summary
Ports the STM32CubeWL firmware library v1.1.0 to the Generic Node Sensor Edition by remapping RF and LED GPIOs, enabling I2C and adding the LIS2DH12 accelerometer driver, and using STM32CubeIDE + STM32CubeProgrammer with an ST‑Link v3 debugger. Code sets a 100 ms sensor-read timer, sends an 8‑byte Cayenne LPP accelerometer payload every 10 seconds, and successfully joins The Things Stack v3 and forwards data to Cayenne/mydevices. Includes exact pin changes, disable low‑power-for-debug, and sample keys for commissioning so the build runs and uplinks real sensor values. STM32CubeWL firmware library v1.1.0
AI-written summary · about
chapters (9)
- 0:00Start
- 2:31Hardware and Software
- 3:24Optional Software
- 4:54Hardware differences
- 5:25Debugger connection to STLINK-V3SET
- 6:15P-NUCLEO-LRWAN2 Gateway configuration
- 7:44Pinout Diagrams
- 8:00Schematics
- 19:41Commissioning
related talks
17mLive Q&A: STM32WL
06mPredictive Maintenance
22mKETCube - the Prototyping&Educational IoT Platform
06mKeynote: STM32 Meets Linux and Open Source
24mRunning AI/Neural networks on microcontrollers made simple with the STM32Cube.AI
47mWhat's new with CTI?
24mMigrating an embedded systems lab to Zephyr: an experience report
29minterviewed at the Artificial Intelligence Conference, London 2018 – Pete Warden