~/talk

How I built my own intelligent Robot Arm from Scratch

Talkat NDC Oslo 2026 · 2026-09-14..09-18· [embedded-and-hardware, robotics]
slides:none on file

Builds a working 6‑DOF robot arm from scrap parts to a 3D‑printed PLA shell, using $1 servos, a Raspberry Pi Zero / Pico running MicroPython and Python, soldered prototype wiring and a gripper that reliably lifts a tissue but can’t handle heavier loads. Integrates teleoperation/leader‑follower control, records nine episodes of demonstrations for imitation learning, exposes movement via FastAPI, and runs inference on a cheapest NVIDIA board (~$500); it works with limits and occasionally fries components.

AI-written summary · about

  1. 0:00Introduction and background
  2. 4:45What is physical AI
  3. 7:11Choosing hardware components
  4. 13:27Building the robot arm prototype
  5. 16:57Soldering and refining the arm
  6. 20:11Advanced robot arm assembly
  7. 23:41Recording and playing back movements
  8. 27:12Adding AI to the robot arm
  9. 30:03Training models with recorded data
  10. 33:12Hardware challenges and lessons
  11. 34:15Why this project is accessible now
  12. 37:46Closing and Q&A invitation
~/search
type to search 6,518 conferences, 143,918 speakers and 192,133 talks
~/help
cmdctrl k
search every conference, speaker and series
/
focus the filter search
h
home
c
conferences
s
speakers
e
series
t
light / dark — the status bar button does the same
← →
on a talk: 5 seconds back / forward
0–9
on a talk: jump to 0%–90% of the recording
?
this help
esc
close this, then clear every filter — or just the search, while you are typing in it

Ignored while you are typing. Pages without a filter rail have no search to focus.